Name: KRIX
Address: 14 Chapman Road / Hackham SA / 5163 Australia
Website: https://www.krix.com.au/
European Manufacturer: No
2-way 15″ floorstanding speaker with mid/tweeter horn 500W, 8 ohms, 38Hz – 16Khz +/-3db, 96db Dimensions: 117.5 x 56.5 cm Depth: 34 cm
The Krix Pix is an extreme 2-way speaker that delivers an incredibly dynamic and effortless performance. Using commercial cinema technology, the Pix are able to produce high sound pressure levels with pristine fidelity and extremely low distortion. True horn and compression driver technology delivers blindingly accurate response and detail on all pitches.
Pix are serious main front speakers for dedicated home theaters. They offer exceptionally high acoustic performance over an extremely wide frequency range, with low harmonic distortion and excellent power handling - particularly noticeable at the third harmonic, in the critical speech range of 1kHz - 3kHz. The Pix's smooth frequency response, acoustic performance and dynamic range are features not often found in a speaker.
The Pix features a 380mm paper cone driver with a 77mm voice coil for increased linear excursion and a powerful, vented magnet assembly designed for low distortion. Its specially developed woofer offers excellent bass performance, high peak program capacity and high efficiency - it is suitable for very high sound pressure levels. The solid ferrite magnet structure contains components designed for maximum efficiency. The symmetrical gap geometry, combined with the large linear voice coil travel, ensures minimal distortion at all levels.
For the high frequency range, the Pix has a design patented by Krix, a 90 x 40 short-throw horn, which offers optimal dispersion of 90 degrees horizontally and 40 degrees vertically across the entire working range. It is powered by a compression driver with a 25mm neck, a 32mm edge-wound aluminum voice coil and a Nomex tensioner. The constant dispersion pattern means far less sound is reflected from side walls and ceilings, ensuring sound energy is focused directly on the listening position, resulting in better clarity.
The horn is attached to the bass cabinet with a sturdy bracket and can be tilted both vertically and horizontally, while the crossover in the bass cabinet is equipped with professional, close-tolerance components to ensure a consistent frequency response.
For the ultimate cinema experience at home, play it via Krix.
Built on decades of research and development experience, Krix X Series speakers and subwoofers feature the same technology used in Krix's internationally recognized commercial cinema speakers. They are designed for use in dedicated home theaters longer than 6 meters.
The X Series speakers require slightly more space at the front of your cinema room than the SX or MX Series and are designed for use behind large, acoustically transparent screens. They're not for small spaces... or for the faint of heart.
Larger rooms tend to be filled with more seats - and you want every viewer to get the most out of the experience. All Series
High power handling, a smooth frequency response and an incredible dynamic range ensure that your special cinema emits the highest quality cinema sound.
Frequency range
38Hz-16kHz in room response
Power handling
500 Watts RMS recommended maximum amplifier power
Sensitivity
96dB for 2.83 volts at 1 meter
impedance
Nominally 8 ohms
Configuration
2-way
Enclosure type
Bass reflex, front vented
Dimensions
Total Dimensions: 1190mm high x 565mm wide x 340mm deep
Low Frequency Drivers
Single 380mm (15″) high stiffness paper cone driver with 77mm (3″) voice coil of optimal length for increased linear excursion, wound on high temperature apical former and powerful vented magnet assembly designed for low distortion
High Frequency Drivers
A Krix patented designed 90º x 40º short throw horn driven by a compression driver with a 1″ throat, coated titanium diaphragm, polyimide surround.
Crossover point
900Hz passive – contact Krix directly for bi-amped active filter parameters
Input terminals
200 amp proprietary terminal posts, accepting up to 6mm diameter cable
Weight
38kg
Haben Sie Fragen zu einem Produkt oder wünschen Sie ein individuelles Angebot?
Kontaktieren Sie uns gerne – wir sind für Sie da! Unser Team berät Sie persönlich und erstellt Ihnen ein maßgeschneidertes Angebot, das genau auf Ihre Bedürfnisse abgestimmt ist.