Parasound New Classic 2250 v.2 2 channel amplifier

Regular price €3.100,00
Regular price €3.100,00 Sale price €3.100,00
Tax included. Shipping calculated at checkout.
  • American Express
  • Apple Pay
  • Google Pay
  • Klarna
  • Maestro
  • Mastercard
  • PayPal
  • Union Pay
  • Visa
Regular price €3.100,00
Regular price €3.100,00 Sale price €3.100,00

2 channel amplifier, 2x 275W RMS at 8 ohms, 2x 400W RMS at 4 ohms, subsonic filter, level control, speaker A/B out, 2-ohm stable, 12 volt trigger W438mm x H152mm x D470mm, 3U rack mount kit RMK33 available separately

Parasound 2250 v.2 Features

  • THX Ultra2 certified
  • 275 watts x 2 into 8 Ω (all channels driven)
  • 400 watts x 2 into 4 Ω or 2 Ω (all channels driven)
  • 750 watts x 1 bridged into 8 Ω or 4 Ω
  • 45 amps peak current per channel
  • 2 Ohm stable operation with load selector switch
  • Two pairs of speaker outputs with front panel A/B buttons
  • Rear-mounted lockout switch disables front A/B buttons
  • High pass filter, switchable for 20Hz or 40Hz
  • Automatic on/off by DC trigger with looping output
  • Automatic on/off by audio signal with 2 sensitivity settings
  • Fully discrete circuitry with high current toroid transformer
  • Bridging switch for stereo or mono operation
  • Efficient, low heat design
  • DC Servo and relay protection circuits
  • Rear-mounted left and right gain controls
  • Standby, channel status and high temperature indicators
  • Gold-plated RCA input jacks
  • Heavy duty 24k gold-plated 5-way speaker terminals
  • 115/230v selector on rear panel
  • 3U rack mount kit available separately (Model RMK33)

Parasound 2250 v.2 Technical Details

All Channels Driven
275 watts x 2.8Ω
400 watts x 2.4Ω
400 watts x 2.2Ω (Load switch set to 2-3Ω)

Bridged Mono
750 watts x 1.8Ω
750 watts x 1.4Ω (Load switch set to 2-3Ω)

Current Capacity
45 amps peak per channel

Frequency Response
20 Hz - 50 kHz, +0/-3 dB, 1 watt
Dynamic Headroom - 1.6 dB

Total Harmonic Distortion
0.20% at full rated output
0.015% at average listening levels

IM Distortion - 0.05%
Transient IM Distortion - Not measurable

S/N ratio
114 dB at rated output, IHF A-weighted
106 dB at rated output, unweighted
93 dB at 2,828 V output, IHF A-weighted
84 dB at 2,828 V output, unweighted

Input Impedance - 33kΩ

Input Sensitivity
1V in for 28.28V out, THX standard

Inter-channel crosstalk
85dB @1kHz, 73dB @10kHz, 67dB @20kHz
Damping Factor - Over 150 at 20Hz
12V Trigger Turn On - DC 9 – 12V, 15 mA

Audio Turn On
Quieter: 1 mV
Louder: 6mV

AC Power Requirements
110 - 120V / 220 -240V, 50 - 60Hz
0.5 watts standby
35 watts idle (no audio)
1000 watts full output

Dimensions
17.25" wide
18.5" deep, with cables connected
6" High with feet, 5.25" panel only (3U)
(437 x 470 x 153mm, 133mm panel only)

Net Weight - 43 lbs (19.5 kg)

Rack mount accessory
May be Purchased Separately: RMK33